A venting hob, also known as a downdraft extractor or a hob with built in extractor, pulls steam and cooking smells down through the hob itself, so there's no hood hanging above it. For an island or an open plan room, that changes what's possible with the design.
We're a BORA partner, and you can cook on a working BORA M Pure in our Horsham and Brighton & Hove showrooms. Our Guildford showroom has a working AEG downdraft induction hob, so across our showrooms you can try more than one approach before you decide. You'll find more about BORA on our BORA page.
How does downdraft extraction work?
A downdraft extractor draws steam, grease and cooking smells into a vent built into the hob, so they're captured at pan level rather than rising towards a hood. The air is then either ducted outside or filtered and returned to the room.
There are two main ways of dealing with the air once it has been drawn in.
Ducted extraction
Ducted systems carry the air away and vent it outside. The ducting usually runs through the cabinet below the hob and then under the floor, through the plinth or along a wall to an outside vent, so the route needs planning early. Ducted systems tend to suit kitchens on an outside wall, or rooms with a clear route through the floor.
Recirculating extraction
Recirculating systems pass the air through filters that trap grease and smells, then return it to the room. They don't need an outside vent, which makes them useful where ducting isn't practical, such as an island in the middle of a large room. The filters have a long life but will need replacing from time to time.
Which is right depends on the room and the building, and it's one of the first things our designers look at. Our team saw the systems demonstrated on many visits to BORA, and that experience shapes the advice we give.
Why choose a venting hob? The design case
For most people choosing a downdraft extractor hob, the design is what appeals first, but the everyday benefits matter just as much. A venting hob gives you:
Clear sightlines. With no hood in the way, you can see across the room from the hob, which is why venting hobs suit the layouts in our open plan kitchen ideas guide so well.
Nothing blocking a window or view. A hob under a window or facing the garden can stay that way.
A cleaner look on an island. The island reads as one simple shape, rather than a hob with a large hood above it.
A more pleasant place to cook. Because smells are captured at the hob rather than drifting up past your face, many people find cooking at an island more comfortable. BORA extractors are also considerably quieter than conventional extractors, which makes a real difference in an open plan room.
Less condensation. Steam is drawn down at the hob before it can spread, so less of it settles on cold windows and walls. That helps reduce condensation, particularly in an open plan room.
There's a practical side too. Steam and smells are dealt with where they start, so they're less likely to drift into the dining or living end of an open plan room. In a home where the kitchen is also where people eat and relax, that's often what tips the decision.
Can you put a venting hob on a kitchen island?
Yes. An island is one of the most common places for a venting hob, because a hood over an island tends to dominate the room. The main things to plan are the extraction route, the cabinet space beneath the hob and the seating around it.
These are the points our designers work through on every island hob.
The extraction route. For a ducted system, the air has to get from the middle of the room to an outside wall. That is far easier to plan before the floor goes down.
The cabinet below. The extraction system generally takes up the space of a cutlery drawer in the cabinet beneath the hob, the equivalent of a standard 150mm high drawer front.
Seating. If people will sit at the island, keep the cooking zone and the seating apart, with enough worktop between them that nobody is sitting next to a hot pan. Our guide to the benefits of a kitchen island covers island spacing and layout in more detail.
Hob position. Where the hob sits on the island affects how much worktop you have either side for prep and for resting hot pans. We'd generally leave a good stretch of worktop on each side, so the island still works as a proper prep area.
If the sink is going on the island as well, our guide to boiling water taps is worth a read too.
It also helps to see one in person before committing. The vent, the controls and the space beneath are much easier to understand when you're standing at the hob than when you're looking at a drawing.
See a working venting hob at our Horsham, Guildford or Brighton & Hove showroom.
Horsham and Brighton & Hove have a working BORA M Pure, and Guildford has a working AEG downdraft hob. Cook on one and talk through your island with one of our designers. All three of our showrooms are open, so you're welcome to visit or book an appointment. Book a showroom visit
Venting hob, ceiling extractor or traditional hood?
We do think venting hobs are generally superior all round. Here's how we'd think about it.
A venting hob suits every layout, including:
Islands and peninsulas where a hood would block the view.
Open plan rooms where you want an uninterrupted line of sight.
Layouts where the hob faces into the room, so whoever is cooking can still talk to family or guests.
Low or sloping ceilings, where a hood or ceiling extractor won't fit comfortably.
A wall run.
If you're considering a ceiling extractor
You'll need enough ceiling height, and space above, for the motor and ducting.
It keeps the extraction off the worktop, but steam and smells rise past you before they're captured.
If you'd prefer a traditional hood
It works on a wall run, ideally vented outside. We prefer extractors that are discreet, such as telescopic extractors, which look like matching cabinets.
Whichever way you're leaning, we'd always suggest cooking on a venting hob first. For smell, condensation, clean lines and performance, it's the option we recommend whatever the layout.
Living with a venting hob
Day to day, cooking on an induction hob with extractor built in feels much like cooking on any good induction hob. You turn the extraction on when you start cooking, and on many models it can adjust itself to what's happening on the hob.
Cleaning is simpler than you might expect. There's no hood to reach up to and degrease, and the parts that collect grease can be taken out for cleaning. It's worth getting into the habit of wiping the vent cover after cooking, the same way you'd wipe the hob.
Most cooks don't need to change how they cook. Using lids on tall pans helps the extraction do its job, and letting it run on for a short while after you finish clears any lingering smells. Your designer can show you how the controls work when you visit.
Choosing a BORA hob
BORA makes several venting hob systems, and the main differences come down to how many cooking zones you need, whether the system is ducted or recirculating, and how the controls look and feel. The BORA M Pure, which we have working in Horsham and Brighton & Hove, is a good example of the range: an induction hob with the extraction built into the centre.
When people search for a BORA hob, they're often thinking about one room in particular, usually an island in a new extension. That's exactly the kind of project where it pays to involve a designer early, because the extraction route has to be planned alongside the floor and the cabinetry.
Rather than choosing from a spec sheet, we'd suggest starting with how you cook and how the room works, then letting a designer narrow down the options. If you'd like to compare a different approach, the AEG downdraft induction hob in our Guildford showroom is a useful point of reference. You can see the other brands we work with on our appliances page.
Venting hob FAQs
Are downdraft extractors any good?
Yes. As a business, we believe downdraft extractors are far superior to every other type of extractor, whatever the kitchen. They deal with cooking smells at the hob before they spread, they help reduce condensation, they keep clean lines with nothing hanging above the hob, and they perform well, drawing steam away at pan level where it starts. You can cook on one in our Horsham or Brighton & Hove showroom.
Can you put a venting hob on an island?
Yes, and it's one of the most popular places for one. The extraction route, the cabinet space beneath the hob and the seating around the island all need planning, ideally before any building work starts.
Do venting hobs need to be ducted outside?
No. Many venting hobs can either be ducted outside or set up to recirculate, filtering the air and returning it to the room. Which is better depends on your room and whether an outside vent is practical, so it's a question to settle at design stage.
Cook on a working venting hob before you decide
A venting hob is much easier to judge in person than on a screen. Come to our Horsham showroom to cook on a working BORA M Pure and talk through your layout with one of our designers. If Guildford is closer, you can book a design consultation there and try the working AEG downdraft hob while you're in. You can also cook on a BORA M Pure at our Brighton & Hove showroom. Bring your floor plan and any photos of the room, and we can show you where a venting hob would sit.
All three of our showrooms are open, so you're welcome to visit or book an appointment. If it suits you better, our designers can also visit you at home. You can read more about our BORA partnership on our BORA page.