Boiling Water Taps: Are They Worth It? A Designer's Guide to Quooker Taps

A boiling water tap gives you boiling water straight from the tap, the moment you need it, with no kettle to fill or wait for. Most people already know that much. The real question is whether one earns its place in a new kitchen, and that is what this guide sets out to answer, including who might be better off without one.

We're a Quooker Authorised Partner and we have working Quooker taps in all three of our showrooms, in Horsham, Guildford and Brighton & Hove, so you can fill a mug, rinse a pan and look at the setup under the sink before you decide anything. You can find more on the range on our Quooker page.

Are boiling water taps worth it?

For most households planning a new kitchen, yes. A boiling water tap replaces the kettle and gives you boiling water in seconds, and it quickly becomes part of how you cook and make drinks. It makes less sense if you rarely boil a kettle, or if you aren't changing your sink and worktop.

The everyday convenience is the obvious part. Tea and coffee are quicker, and so is filling a pan for pasta or topping up a casserole. Once you've lived with one for a few weeks, waiting for a kettle starts to feel slow.

The less obvious benefit is space. Without a kettle, the worktop next to the sink stays clear, which matters more than people expect in a smaller kitchen or a handleless design where a clean run of worktop is part of the look. It also changes how the sink area works. The tap becomes the place where drinks get made, so it makes sense to plan mugs, tea and coffee into a drawer close by.

So who gets the most from one? Busy family kitchens, and keen cooks who always seem to have a pan on the go. Who might not need one? A couple who make two cups of tea a day may find a kettle does the job perfectly well. And if you're keeping your existing sink and worktop, the decision is more about whether fitting one later is practical, which we cover below.

When you read boiling water tap reviews, look at whether the problems people mention are about the tap itself or about how it was planned. A cramped sink cabinet or a tap in an awkward spot is a design issue, and it's one that's easy to avoid at the planning stage.

How does a boiling water tap work?

A boiling water tap is connected to a compact tank in the cabinet under the sink. The tank keeps a supply of water hot, and when you use the boiling function, the tap delivers it at a boil straight away.

You'll sometimes see them called hot water taps or instant boiling water taps. A standard hot water tap gives you hot water from your boiler, whereas a boiling water tap delivers water at a full boil, which is what you need for tea, coffee and cooking.

The tank is insulated so it holds its heat between uses, and it tops itself up from the mains as you draw water off. It needs space in the sink cabinet and a power supply nearby, which is one reason it is easier to plan in from the start.

Tank sizes, energy use and running costs vary by model and by how you use the tap. Your designer can talk you through the details for the model you're considering.

Choosing the right Quooker tap

Quooker makes several tap styles, and the right one depends on how you use your sink. These are the ones people ask us about most.

Quooker Fusion

The Fusion combines a normal hot and cold mixer with boiling water in a single tap. It suits anyone who wants one tidy tap at the sink rather than two.

Quooker Flex

The Flex does everything the Fusion does and adds a pull out hose, which makes rinsing a deep sink or filling a tall pan much easier. There's a working Quooker Flex in our Guildford showroom if you'd like to try it for yourself.

Quooker CUBE

The CUBE isn't a tap. It sits in the sink cabinet alongside the tank and gives you chilled and sparkling filtered water from the same tap. If your household gets through a lot of bottled water, it's worth a look.

Each tap comes in a choice of finishes, so it can match your sink, handles and other metalwork.

How much does a Quooker tap cost?

There isn't one price for a Quooker tap. The cost depends mainly on the model and finish, whether you add the CUBE, and whether it's fitted as part of a new kitchen or added later.

The main things that affect what you'll pay are:

  • The model. A combined mixer such as the Fusion and a Flex with a pull out hose sit at different levels.

  • The finish. Some finishes cost more than others.

  • The CUBE. Chilled and sparkling water is an addition on top of the tap and tank.

  • Timing. Fitting one as part of a new kitchen is usually simpler than adding it to an existing one.

That last point is worth dwelling on. When a boiling water tap is planned in at design stage, the sink cabinet is laid out around the tank, the tap hole is cut when the worktop is made, and the power supply goes in with the rest of the electrics. Adding one later can mean rearranging the cabinet below the sink and drilling a worktop that's already fitted.

If you'd like to spread the cost of a new kitchen, our finance options page explains how it works.

It's also worth thinking about value over time. A boiling water tap gets used many times a day for years, so choosing the model that suits how you actually cook usually matters more than the difference between one style and another.

See a Quooker working at our Horsham, Guildford or Brighton & Hove showroom.

Try the tap for yourself and talk it through with one of our designers. All three of our showrooms are open, so you're welcome to visit or book an appointment. Book a showroom visit

Boiling water taps in family kitchens

Safety is the first question most parents ask, and it's a fair one. Quooker taps have a childproof handle on the boiling function as standard, so releasing boiling water takes a deliberate action rather than a simple turn of the handle.

That said, it is still boiling water, and it's worth treating it that way. Show older children how the tap works, and think about where it sits in relation to what younger children can reach. Your designer can help with that when planning the layout.

Position matters on an island too. If children sit at the island to eat or do homework, it's worth keeping the sink and tap at the cooking end rather than right in front of the seats.

Designing a boiling water tap into your kitchen

This is where planning makes the biggest difference. Our designers look at a few things in particular.

  • Placement. The tap almost always sits at the main sink, so it helps to think about where drinks get made and where the mugs live. If your sink is on an island, the tap becomes part of the social side of the kitchen. Our guide to the benefits of a kitchen island covers island layouts in more detail.

  • The sink cabinet. The tank, and the CUBE if you choose one, need room in the cabinet below the sink. That space would otherwise go to waste bins or storage, so we plan them together rather than squeezing the tank in later.

  • Finish and materials. Matching the tap to your sink, handles and other metalwork pulls the whole area together. The tap hole is cut into the worktop when it's made, so it's worth choosing the tap before the worktop is templated. Our worktop materials guide and worktops page are a good place to start.

  • Your drinks area. With the kettle gone, the space beside the sink can become a small drinks station, with a drawer for mugs, tea and coffee right below. It's a simple change that makes the kitchen easier to use when several people are making drinks at once.

You can see the sinks we design around on our sinks and taps page. If you're choosing the rest of your appliances at the same time, our appliances page shows the brands we work with.

Boiling water tap FAQs

Are boiling water taps safe with children?

They're designed with families in mind. The boiling function needs a deliberate action to release it, which makes accidental use much less likely. It's still boiling water, though, so it's worth showing children how the tap works and planning its position with care.

Do you still need a kettle with a Quooker?

Generally, no. A Quooker gives you boiling water whenever you need it, so a kettle becomes one less thing on the worktop. Some people keep one in a cupboard as a backup, but day to day you shouldn't need it.

Can you fit a boiling water tap to an existing kitchen?

Yes, as long as there's room for the tank in the cabinet under the sink, a power supply nearby and a suitable tap hole in the worktop or sink. It is more straightforward when planned into a new kitchen, so if you're renovating soon, it's worth including in the design. A designer can tell you whether your current kitchen is suitable.

See a Quooker working before you decide

The best way to decide whether a boiling water tap is worth it is to use one. Come and fill a mug and look at the tank under the sink at our Horsham, Guildford or Brighton & Hove showroom, then talk through your plans with one of our designers. If you can, bring a photo of your sink area and some rough measurements. 

All three of our showrooms are open, so you're welcome to visit or book an appointment. If it suits you better, our designers can also visit you at home. You can read more about our Quooker partnership on our Quooker page.

Next
Next

Downdraft Extractors and Venting Hobs: A Designer's Guide